![]() This will make the birds mouth joint to allow the rafter to rest on the shed wall. As you can see in the diagram that you will need to make a vertical and horizontal cut according to your plans roof angle. You may need the wood chisel to make sure all of the wood cut out of the birds mouth joint is removed. This joint is the end of the rafter that will rest on the shed wall. Once the rafter end is cut you will move on to cutting your birds mouth joint. These ends will meet in the middle of the shed roof so they have to be cut at the proper angles according to your roof plans pitch. Measure your rafter angle needed using your rafter square according to your plans. If this seems confusing, then watch the video below. After the ends are cut you will then cut the birds mouth joint so the end of the rafter will attach to the shed walls. Then you will cut the rafter ends which is where each rafter will meet in the middle of the roof. First thing is to cut your board at the right length you will need. Shed Roof Building – Cutting The Raftersīuild the first roof rafter and then use this as your template for the rest of the rafters. Amazon has some of the best buys on construction tools with no shipping so check it out here if you need some tools. A portable circular saw and a miter saw will help you make accurate cuts in the wood. ![]() You will also need to know how to use your rafter square so you can measure angles in your rafters. Get your drill, hammer, wood chisel, nails and screws needed for the project.
0 Comments
Leave a Reply. |